•  

MR13FFR

Millenium Edge Cutoff for Architectural High Abuse

Main Product Image
Model #: MR13FFR
Features:
  • Semi-recessed mount – ceiling or wall; nominal 13"Dia.×2"D
  • Peace of Mind Guarantee® against breakage available
  • Dust and water protected to IP64 standards
  • Full cut-off for IDA-Approved™ Dark Sky installations
  • ADA compliant
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Schools and Universities
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):13"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketingClosed cell, silicone “O” ring gaskets positioned in gasket channels of lens base and housing.
HardwareOne stainless steel Torx® with center pin fastener.
HousingHOUSING (SERIES PP,ND,CO): Die-cast aluminum with integral heat sinks. Marine grade aluminum housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior TGIC polyester powder coat – 5-step pre-treatment. Dark bronze optional finish. (SERIES NL,CC): 18-gauge CRS housing with marine grade cast aluminum housing flange. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard black or white exterior TGIC polyester powder coat – 5-step pre-treatment. Dark bronze optional finish.
InstallationSee Technical Sheets for semi-recessed installation details, mounting accessories and rough-in box availability.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
Lens BaseMarine grade die-cast aluminum. Standard impact resistant finishes – black or white. Optional dark bronze (DB) chemically bonding, impact resistant finish.
ListingsLuminaire is certified to UL Standards by either Underwriters Laboratory or Intertek Testing Laboratory for wet location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. IESNA-designated full cut-off. IDA-Approved™ Dark-Sky Friendly Fixture. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux.
Lumen DataMR13FFR Lumen Data
ReflectorCompact Fluorescent: Full reflector/wire cover – 90% reflectivity. HID: Full reflector/wire cover – high efficiency aluminum.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps
and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top