Skip to Content
Kenall Manufacturing - Homepage
Main Content

MPCADE24-TW

MedMaster for Patient Rooms

MPCADE24-TW Main Image
MPCADE24-TW Main Image
Model #: MPCADE24-TW
Features:
  • Ceiling mount – recessed grid, recessed flange or surface; 2'×4'
  • High-output high-CRI LED lamp services with 2700K-6500K white tuning capability (Ambient function)
  • Ambient and exam lighting with optional reading compartment
  • Ingress Barrier Door provides consistent surface for cleanability
Application(s):Patient Rooms
Isolation Areas
Lamp Type(s):LED
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeHeavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips-head stainless steel fasteners secure door to housing – 8 with IB-AC and 2 with IB-HD. Extruded closed cell gasket seals doorframe to housing.
Driver/Controls120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. AMBIENT: Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details. . EXAM: Serviceable constant-current programmable driver. Dimming protocol matches tunable white circuit selection: 0-10V dimming with 1-100% range and dim-to-dark capabilities or DALI with 1-100% range and dim-to-dark capability.
HousingFlange and Grid – 20-gauge CRS. Surface – 18-gauge CRS. One-piece seam welded construction. White TGIC polyester powder coast – 5-stage pre-treatment. Salt spray test 1,000 hours. Reflectance 92%. (See options for Antimicrobial Finish). Housing Flanges –18-gauge CRS.
InstallationSURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.
Lamp ShieldingExam compartment shielded by frosted linear prismatic high impact acrylic. Ambient compartment shielded by 100% internal fluted high impact acrylic.
LED ModuleAMBIENT: Serviceable tunable-white, mid-power LED array provides 2700K through 6500K CCT range with a two-point path. 3-step MacAdam variation allowance on each CCT. Minimum 82 CRI standard (R9 >20) with optional minimum 92 CRI (R9 >50). EXAM: Serviceable mid-power LED array. See Ordering Information for CCT options. 3-step MacAdam variation allowance. 82 CRI minimum.
Lens.125" clear high impact acrylic. Sealed to extruded aluminum frame with a vinyl gasket.
ListingsUL and CUL Listed for Wet Location and UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only). CCEA approved for grid or flange mount.
OpticsOuter lens constructed of 0.125” clear impact-resistant acrylic and sealed to doorframe with vinyl gasketing. Inner exam and ambient functions are constructed with high-efficiency frost acrylic.
PatentU.S. Patent No. D562,767 on Low Voltage Controller (LVC) option.
WarrantyLimited five (5) year warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top