Skip to Content
Kenall Manufacturing - Homepage
Main Content

MLRS5S

Millenium Stretch

MLRS5S Main Image
MLRS5S Main Image
Model #: MLRS5S
Features:
  • Surface mount – ceiling or wall; 5"×48"
  • Extruded aluminum housing with decorative end caps
  • Low-profile –ADA compliant
Application(s):Parking Garage
Parks and Recreation
Locker Rooms
Multifamily Housing
Walkways
Stairwells
Schools and Universities
Foyers and Lobbies
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent High Impact 100% DR Acrylic
Clear High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):5"W
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. Consult factory for flourescent options.
End Caps/BandsMarine grade die-cast aluminum. Four end cap styles available: Flat, Rounded, Reveal and Stepped. Conduit/Wiremold™ knockout visible only from interior of end cap (Flat and Rounded styles only).
HardwareFour stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel.
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). NOTE: Contact factory for custom lengths.
InstallationStandard four-point mounting per fixture recommended.
LensUV-stabilized, high impact extruded clear acrylic. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper- resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsDamp Location Listed to UL 1598 – corner, horizontal wall, vertical wall and pendant mount installation. See Options for Wet Location – covered ceiling mount.
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited ten (10) year warranty for LED Lamps.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

REVIT Files

Additional Resources

top