| Electrical | LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. LED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 250 μA. |
|---|
| End Caps | Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only). |
|---|
| Hardware | Four stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel. Electrical Quick Connector supplied (Specify Circuit Qty, see below). |
|---|
| Housing | Marine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for finishes. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). NOTE: Contact factory for custom lengths. See Dimensional Data for raceway. See Options for second raceway (2RW). |
|---|
| Installation | Standard six-point mounting per fixture required for Peace of Mind Guarantee®. |
|---|
| Lens | UV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceiling mount. IP64 rated – ceiling mount. ADA compliant. Corner, horizontal wall and pendant mount installation – damp location only. Suitable for use as a raceway. Suitable for use in continuous row. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. |
|---|
| Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
|---|
| Reflector | Full reflector/wire cover – 92% reflectivity. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | limited ten (10) year warranty for LED Lamps. |
|---|