•  

MLHA12

Millenium Stretch

Main Product Image
Model #: MLHA12
Features:
  • Surface mount – ceiling or wall; 12"×24", 12"×36", 12"×48", 12"×72", 12"×96"
  • Individual luminaires
  • Peace of Mind Guarantee® against breakage
  • ADA compliant
Application(s):Parking Garage
Parks and Recreation
Packaging and Staging
Kitchen and Food Prep
Locker Rooms
Multifamily Housing
Cafeterias
Walkways
Washrooms (Correctional)
Restrooms
Stairwells
Showers
Dorm Rooms
Schools and Universities
Transportation Platforms
Foyers and Lobbies
Corridors
Sally Ports
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Natatoriums
Manufacturing
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Size(s):12"W
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
End CapsMarine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).
HardwareStainless steel, tamper-resistant Torx fasteners secure lens in housing body's lens channel (four on 24", 36", and 48" housings; eight on 72" and 96" housings).
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes.
InstallationStandard four-point (24" housing) six-point (36" and 48" housings) and twelve-point (72" and 96" housing) mounting required for Peace of Mind Guarantee®.
LensUV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsUL and CUL listed for Wet Location – covered ceiling mount. UL certified IP64 per IEC 60598. Damp rated – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Lumen DataMLHA12 Lumen Data
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
Warrantylimited ten (10) year warranty for LED Lamps.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top