•  

MEE12

MedMaster for Patient Rooms

Main Product ImageMEAE24_FV002.jpgMEAE24_HandControl.jpgMEAE24_Plate.jpg
Model #: MEE12
Features:
  • Recessed ceiling mount – grid
  • Sealed for infection control
  • High-CRI LED or halogen lighting
  • Motorized positioning with low-voltage control
Application(s):Patient Rooms
Lamp Type(s):LED
Size(s):12"×48"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Door18-gauge CRS, inset one-piece seam welded construction. AC option doorframe secured to housing with aircraft cable and six (6) captive flush-mounted Phillips-head stainless steel fasteners. HD option secured to housing with stainless steel hinge and two (2) captive flush-mounted Phillips-head stainless steel fasteners. TL option features tool-free compartment access with spring-clip retention. Exam door sealed to housing with closed-cell silicone gasket. Finish to match housing. Clear tempered glass lens sealed to frame with silicone sealant and secured with lens retention system.
Exam ControlStandard low-voltage wall control provides forward/reverse position control and on-off switching of exam lamps. Lamp position control available even when lamps are powered off. Wall control mounts to a two-gang junction box and connects to luminaire via CAT5 wiring (by others). Optional corded hand controller is easily cleanable and features forward/reverse position control of exam lamps. See technical data sheet for more information.
Housing20-gauge CRS, one piece seam welded construction; 18-gauge flange spot-welded to housing. White TGIC polyester powder coat-5 stage pre-treatment. Salt-spray test: 1000 hours.
LampsBi-directional motorized examination lamping system with 0° to 50° rotation and fine position control. Exam lamps remotely operated via wall and handheld control (see below). MR16 or high-CRI LED light source provides focused, high-intensity illumination; see Lamp Options for details. 120/277VAC input with internal low-voltage transformer. Chart light optionally available with manual position adjustment; 20W MR16 or 4.5W LED MR16 included.
Listings50W MR16 and LED: Wet Location Listed to UL1598 and UL8750 (LED) by Intertek Testing Laboratory. Certified IP64 per IEC 60598 by Intertek Testing Laboratory. NSF2 Splash/Non-Food Zone. 75W MR16: Dry Location Listed to UL1598 by Intertek Testing Laboratory. NSF2 Splash/Non-Food Zone.
Luminaire Installation1" grid installation with wire support hardware included.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top