•  

MEAE24

MedMaster Envela Recessed Luminaires

Main Product ImageMEAE24_FV002.jpgMEAE24_HandControl.jpgMEAE24_Plate.jpg
Model #: MEAE24
Features:
  • Recessed ceiling mount – flange or grid; 2'×4'
  • Sealed ambient/reading and exam compartments for infection control
  • High-CRI LED or halogen exam lighting
  • Motorized exam positioning with low-voltage control
Application(s):Patient Rooms
Isolation Areas
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):24"×48"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Ambient ElectricalFluorescent electronic 120-277VAC ballast (>0.9 PF, < 10% THD); see Ordering Information for Ambient electrical options; lamps by others.
Ambient Lamp Shielding/LensFully gasketed, sealed luminous shield with impact-resistant DR acrylic. See Ordering Information for lens options.
Ambient Reflector20-gauge CRS, one-piece seam-welded construction. Tool-free lamp access. White high-reflectance low-gloss TGIC polyester powder coat – 5 stage pre-treatment. Reflectance 90%. Salt spray test: 1,000 hours.
Exam ControlStandard low-voltage wall control provides forward/reverse position control and on-off switching of exam lamps. Lamp position control available even when lamps are powered off. Wall control mounts to a two-gang junction box and connects to luminaire via CAT5 wiring (by others). Optional corded hand controller is easily cleanable and features forward/reverse position control of exam lamps. See technical data sheet for more information.
Exam Door18-gauge CRS, inset one-piece seam welded construction. Standard doorframe secured to housing with aircraft cable and six (6) captive flush-mounted Phillips-head stainless steel fasteners. HD option secured to housing with stainless steel hinge and two (2) captive flush-mounted Phillips-head stainless steel fasteners. TL option features tool-free compartment access with spring-clip retention. Exam door sealed to housing with closed-cell silicone gasket. Finish to match housing. Clear tempered glass lens sealed to frame with silicone sealant and secured with lens retention system.
Exam LampingBi-directional motorized examination lamping system with 0° to 50° rotation and fine position control. Exam lamps remotely operated via wall and handheld control (see below). Standard MR16 or optional high-CRI LED light source provides focused, high-intensity illumination; see Lamp Options (Exam) for details; MR16 lamps by others. 120/277VAC input with internal low-voltage transformer. Chart light optionally available with manual position adjustment; 20W MR16 or 4.5W LED MR16 included.
Housing20-gauge CRS, one piece seam welded construction; 18-gauge flange spot-welded to housing. White TGIC polyester powder coat-5 stage pre-treatment. Salt-spray test: 1000 hours.
Listings50W MR16 and LED Exam: Wet Location Listed to UL1598 and UL8750 (LED) by Intertek Testing Laboratory. Certified IP64 per IEC 60598 by Intertek Testing Laboratory. NSF2 Splash/Non-Food Zone. 75W MR16 Exam: Dry Location Listed to UL1598 by Intertek Testing Laboratory. NSF2 Splash/Non-Food Zone.
Luminaire InstallationGRID MOUNT: 1" grid installation with wire support hardware included. FLANGE MOUNT: Mounting yokes and hardware included. See Accessories for additional flange mounting options—Install and Plaster Frame accessory positively locates yoke brackets within ceiling opening to ensure proper luminaire alignment.
PatentU.S. Patent No. 8,511,850.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top