•  

MDLIC6

Indigo-Clean

Main Product Image
Model #: MDLIC6
Features:
  • 6” sealed, recessed downlight with regressed or flush lens trim
  • Two operational modes: White LED Mode & Indigo Disinfection Mode
  • Indigo Mode provides concentrated disinfection for high-contamination areas
  • White LED Mode provides up to 2,000 lm
Application(s):Restrooms
Nursing Stations
Patient Rooms
Lens Type(s):.125" High-Impact Clear Acrylic
Lamp Type(s):LED
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED array with individually-controlled 405nm Indigo and white LED circuits. White LED available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Indigo/White Mode selection input is via secondary 120-277VAC SPST switched input and controlled by internal relay. Must be specified in conjunction with provided IC75 occupancy-sensing room control system.
HeatsinkDie-cast aluminum with external radial fins for natural convection.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 and IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone. Optional CCEA compliance.
OpticalHigh-efficiency mixing chamber design with regressed diffused tempered-glass lens produces uniform light output. Flush lens trim options include a clear lens. Available with various reflector finishes and medium distribution pattern. See reflector finish ordering information for available options.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.
Rough-In Frame18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.
Trim/Housing SectionIP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Configurable with an IP64-rated Regressed or Flush lens trim that is secured to the Rough-In frame with hidden torsion springs, and an IP65 Flush lens trim secured with four (4) phillips head, captive fasteners. Anti-microbial finish standard on all exposed painted surfaces. See trim ordering information for available options.
WarrantyFive (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top