•  

MCSL-VR

MedMaster SoftStep Contour Steplights

Main Product Image
Model #: MCSL-VR
Features:
  • Semi-recessed wall mount
  • Rectangle vertical orientation
  • ADA compliant
  • Amber, White or Blue LED lamp options
  • Lumen output adjustable to 100%, 50% and 25% levels
Application(s):Multifamily Housing
Nursing Stations
Dorm Rooms
Patient Rooms
Foyers and Lobbies
Isolation Areas
Corridors
Lamp Type(s):LED
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical120-277VAC, 50/60 Hz Maximum input power 3.8 watts. LED light source available in warm white (ANSI 2700K), neutral white (ANSI 4000K), amber (600nm), or blue (470nm). Lumen output adjustable to 100%, 50%, and 25% at time of maintenance or installation. Factory pre-set at 50% dimming level (1.5 watts).
HousingDie-cast aluminum. TGIC polyester powder coat finish – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish on all exposed components of installed luminaire. See Ordering Information for finish options.
InstallationStandard installation requires the back plate to be mounted to a NEMA single-gang junction box (supplied by others). See junction box accessories below for adjustable thru-wall and single-sided applications. See SoftStep Contour Junction Box Accessories Tech Sheet for application details. Recommended mounting height is 14" from floor to center of luminaire.
LensUV-stabilized, high-impact resistant injection molded pearlescent polycarbonate.
ListingsUL and CUL Listed for Wet Location. NSF2 Splash/Non-Food Zone. ADA Compliant. Optional UL certified IP64 per IEC 60598. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux.
Lumen DataMCSL-VR Lumen Data
Mounting PlateDie formed corrosion resistant steel.
PatentU.S. Patent D645175.
ReflectorDie cast aluminum reflector with integral heat sink.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top