•  

M2SEGI24

MedMaster for Surgical Suites

Main Product Imageasymmetrical-lens-detail.png
Model #: M2SEGI24
Features:
  • Recessed ceiling mount – grid; 2'×4'
  • One-piece sealed housing and doorframe for infection control
  • Smooth exterior lens for cleanability
  • Sureshield™ mesh filter reduces radiated emissions
  • Radiated and conducted emissions controlled as per MIL-STD-461F with electronic dimming ballasts
Application(s):Surgical Suites
Lens Type(s):Specified Lens
Micro Linear Prism
Lamp Type(s):Linear Fluorescent
Size(s):24"×48"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS, one-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. Antimicrobial finish standard on all exposed painted surfaces of installed luminaire. Doorframe Gasket: One-piece closed cell silicone gasket seals doorframe to housing.
Doorframe GasketOne-piece closed cell silicone gasket seals doorframe to housing.
ElectricalElectronic ballast <10% THD. Programmed-Start, low voltage electronic dimming ballast (DM7) designed to operate T8 or T5HO fluorescent lamps over a full range of light output (100-3% T8; 100-1% T5HO). Minimum Power Factor .98 for T5HO and .99 for T8. THD at full light output 10%. Operates from compatible 0-10vdc controllers on Class 1 or Class 2 low voltage systems. See Ordering Information for alternate or multiple ballasts and optional equipment. Lamps by others. RFI suppressor standard – one per circuit, one circuit standard.
Housing20-gauge CRS, hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Antimicrobial finish standard on all exposed painted surfaces of installed luminaire.
Housing Flange18-gauge CRS. Mitered and welded corners then spot-welded to housing before painting.
Installation1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-bar ceilings.
LensTwo piece design. Smooth lens exterior is .125" clear acrylic, sealed to doorframe with silicone sealant. Interior lens is .030" acrylic micro linear prism, both lenses mechanically secured in place. See options for alternate lens.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved. NSF2 Splash/Non-Food Zone. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Radiated and conducted emissions controlled as per MIL-STD-461F (standard with electronic and electronic dimming ballasts).
OpticsSymmetric reflectors are CRS with a high reflectance powder coated surface. Asymmetric reflectors are premium 95% specular aluminum. Green phosphor lamp (GL Option) located in symmetric reflector area (see Cross Section right). Light direction reflectors are field changeable.
PatentU.S. Patent No. 7,648,252.
SureshieldStainless steel mesh filter reduces radiated emissions.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top