Skip to Content
Kenall Manufacturing - Homepage
Main Content

LPS5

Low Profile Sconce

LPS5 Main Image
LPS5 Main Image
Model #: LPS5
Features:
  • Surface wall mount in 1', 2' and 3' lengths
  • One-piece die-cast aluminum frames with edge-lit LED lamp source
  • Optional decorative lens materials
  • Wall backlight on damp location configurations
  • Simple-to-clean construction—meets NSF2 requirements
Application(s):Nursing Stations
Patient Rooms
Foyers and Lobbies
Corridors
Lamp Type(s):LED
Size(s):24"
36"
12"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalHigh-brightness LED array with isolated thermal pads. Maximum 4-step MacAdam variation allowance. 80CRI minimum. 120-277VAC, 50/60Hz input with replaceable high power factor electronic constant-current driver (<20% THD, >0.90 PF). Standard 0-10V dimming with 10-100% range. Minimum 85% driver efficiency. EMC meets or exceeds FCC CFR Part I5.
HousingMarine-grade die-cast aluminum frame. Frame serves as LED heat sink. Die-formed and welded aluminum driver enclosure, TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell gasketing at all housing interfaces.
InstallationOne (1) fastener secures frame assembly to mounting plate. Mount over junction box by four-point anchors (hardware by others).
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location. NSF2 Splash/Non-Food Zone. ADA compliant. Optional Wet Location rating and IP64 rating per IEC 60598. Photometry tested to the IESNA LM-79 standard by an ILAC/ISO17025 accredited laboratory.
Lumen DataLPS5 Lumen Data
NoteCustom decorative lenses and color-coordinated custom color frames are available.
OpticalInternal laser-etched acrylic light guide for uniform luminance from edge-lit LED light source. Thin film polycarbonate diffuser; white appearance when unlit (standard outer lens). Optional decorative lens finishes are internally laminated with a matte outer finish. Softly- illuminated wall backlight on damp location products.
PatentU.S. Patent No. D687,177 S, No. D687,178 S.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top