•  

HSEGI22

SimpleSeal

Main Product Imageaircraft-detail.pngfastener-detail.pngswingoutarms.pngwhip_6350.png
Model #: HSEGI22
Features:
  • Recessed ceiling mount – grid for 1.0" and 1.5" T-Bar; 2'×2'
  • One-piece inset doorframe secured to housing with aircraft cables
  • 20-gauge, hole-free one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D
Application(s):Hazardous Locations
Lens Type(s):.125" Prismatic Acrylic
.125" #12 Prismatic Polycarbonate
.187" Prismatic Polycarbonate
.125" Clear Polycarbonate
.156" C73 Prismatic Tempered Glass
Specified Lens
.125" Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s):Linear Fluorescent
Size(s):24"×24"
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with aircraft cables and (8) for 2×2 captive mounted Phillips head stainless steel fasteners. Closed cell extruded silicone gasket seals doorframe to housing.
ElectricalFluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Installation1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips. Consult factory for custom T-Bar ceilings.
Lens.125" P12 acrylic lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D. CCEA approved.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top