Skip to Content
Kenall Manufacturing - Homepage
Main Content

HASEGI14

SimpleSeal

HASEGI14 Main Image
HASEGI14 Main Image
Model #: HASEGI14
Features:
  • Recessed ceiling mount – Grid; for 1.0" and 1.5" T-Bars – 1'×4'
  • One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners
  • 20-gauge hole-free, one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Peace of Mind Guarantee® against breakage
  • UL certified IP65 per IEC 60598
Application(s):Cafeterias
Restrooms
Stairwells
Storage Facilities
Corridors
Sally Ports
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Lens Type(s):.125" Prismatic Acrylic
.187" Prismatic Polycarbonate
.250" Clear Polycarbonate
Specified Lens
Lamp Type(s):Linear Fluorescent
Size(s):12"×48"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with continuous hinge and (3) for 1×4 tamper-resistant stainless steel Torx® with center pin fasteners. Doorframe Gasket closed cell extruded silicone gasket seals doorframe to housing.
ElectricalFluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.Housing Flange 20-gauge CRS. Mitered and welded corners and spot-welded to housing.
Installation1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips. Consult factory for custom T-Bar ceilings.
LensSee Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top