•  

HASEFI22T5

SimpleSeal

Main Product Image
Model #: HASEFI22T5
Features:
  • Recessed ceiling mount – flange; 2'×2'
  • One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners
  • 20-gauge hole-free, one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Peace of Mind Guarantee® against breakage
  • UL certified IP65 per IEC 60598
Lens Type(s):.187" Prismatic Polycarbonate
.250" Clear Polycarbonate
Specified Lens
.125" #12 Prismatic Acrylic inside lens/.250" Clear Polycarbonate outside lens
Lamp Type(s):Linear Fluorescent
Size(s):24"×24"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners.
Doorframe GasketClosed cell extruded silicone gasket seals lens frame to housing.
ElectricalFluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing20-gauge CRS. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Housing Flange18-gauge CRS. Mitered and welded corners and spot-welded to housing.
InstallationAdjustable swing-out mounting brackets standard.
LensSee Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top