Skip to Content
Kenall Manufacturing - Homepage
Main Content

H612EL

Herculux for Institutional High Abuse

H612EL Main Image
H612EL Main Image
Model #: H612EL
Features:
  • Surface wall mount – nominal 6"W×12"L×4"D
  • 16-gauge aluminum housing
  • UV-stabilized, injection molded polycarbonate lens
  • Stainless steel Torx® fasteners
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Schools and Universities
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):6"×12"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate14-gauge aluminum. Baseplate flange interlocks around lens producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes and one wireway hole. Standard dark bronze TGIC polyester powder coat – 5-step pre-treatment. See Ordering Information for optional finishes.
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
EyelidHigh-impact resistant, UV-stabilized injection molded opaque dark bronze polycarbonate. See Ordering Information for optional finishes to match baseplate.
GasketDie-cut closed cell neoprene gasket seals lens/baseplate to mounting surface. H612EL: Lens inset into baseplate and sealed with one “O” ring closed cell silicone gasket.
HardwareFour stainless steel Torx® with center pin fasteners secure lens to baseplate. H612EL: Shoulder fastener design and washer prevent lens/eyelid stress due to over torquing.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LensOne-piece wraparound lens (UV-stabilized, high impact, virgin injection molded polycarbonate). Smooth exterior, prismatic interior. Nominal thickness: 0.125".
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. ADA compliant.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top