•  

ESEFI14T8

SimpleSeal

Main Product Imagefastener-detail.pngIP64hinge.pngswingoutarms.pngwhip_6350.png
Model #: ESEFI14T8
Features:
  • Recessed flange; ceiling mount – 1'×4'
  • One-piece inset doorframe, secured to housing with continuous hinge and fasteners
  • 20-gauge hole-free, one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • UL certified IP65 per IEC 60598
Application(s):Packaging and Staging
Restrooms
Storage Facilities
Corridors
Exteriors and Entryways
Lens Type(s):.125" Prismatic Acrylic
.125" #12 Prismatic Polycarbonate
.187" Prismatic Polycarbonate
.125" Clear Polycarbonate
.156" C73 Prismatic Tempered Glass
Specified Lens
.125" Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s):Linear Fluorescent
Size(s):12"×48"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with continuous hinge and (3) for 1×4 captive mounted Phillips head stainless steel fasteners. Closed cell extruded silicone gasket seals doorframe to housing.
ElectricalFluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing20-gauge CRS. Hole-free seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Housing Flange18-gauge CRS. Mitered and welded corners then spot-welded to housing.
InstallationAdjustable swing-out mounting brackets standard.
LensAdjustable swing-out mounting brackets standard.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top