•  

ESEDI24

SimpleSeal

Main Product Imageaircraft-detail.pngFULCRUM-COLORIZED-INSET.pngswingoutarms.pngwhip_6350.png
Model #: ESEDI24
Features:
  • High-output, high-CRI LED lamp sources for accurate color rendition and lighting performance
  • Diffused high-efficiency lens for reduced glare
  • Recessed ceiling mount; grid or flange - 2'×4'
  • 20-gauge hole-free, one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • UL certified IP65 per IEC 60598
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Lens Type(s):.125" #12 Prismatic Polycarbonate
.187" Prismatic Polycarbonate
.125" Clear Polycarbonate
Specified Lens
Lamp Type(s):LED
Size(s):12"×48"
Listings:         
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and (2) for 2×2, (3) for 1×4, 2×4 captive mounted Phillips head stainless steel fasteners. Closed cell extruded silicone gasket sealsdoorframe to housing.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range.
Housing20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationAdjustable swing-out mounting brackets standard.
Lens.125" P12 acrylic lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. ­Lens orientation – smooth side out.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.
Lumen DataCSEDI14 Lumen Data
OpticsSymmetric optic includes diffused, impact-resistant acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top