Skip to Content
Kenall Manufacturing - Homepage
Main Content

DLD1622

LuxTran for Transportation

DLD1622 Main Image
DLD1622 Main ImageDLD1622 Hinge
Model #: DLD1622
Features:
  • Surface ceiling mount – 16"×22"
  • Housing features mounting brackets that allow 90° adjustment from either direction
  • Stainless steel latches allow for tool-less access to lamp/ballast compartment
Application(s):Underpass and Tunnel
Lamp Type(s):LED
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeOne-piece, .063" 3003 aluminum alloy construction. Doorframe supported to housing with aircraft cables. Doorframe sealed to housing with sillicone gasketing.
ElectricalSerivceable LED array in 4000K, 5000K, 5700K color temperatures with maximum 5-step MacAdam variation allowance. Minimum 70 CRI. DV Voltage Type: 120-277VAC, 50/60Hz input. 0-10V dimming protocol with 10-100% range without dim-to-dark. 0.9mA source current per luminaire.  EMC compliant with FCC 47 Part 15 Class A.  CV Voltage Type:  277-480VAC, 50/60Hz input.  0-10V dimming protocol with 6-100% range with dim-to-dark capabilities at 0V.  0.1mA source current per luminaire.  EMC compliant with FCC 47 Park 15 Class B.
HardwareTwo stainless steel latches secure doorframe to housing.
HousingOne-piece, seam welded 3003 aluminum alloy construction – .063" housing wrapper with .125" end caps. Light grey TGIC polyester powder coat finish – 5-step pretreatment. Salt spray test: 1,000 hours.
InstallationMounting bracket flanges contain two .437" diameter mounting holes.Housing provided with threaded entrances to accept standard 1/2" conduit fittings.
Lens.156" Prismatic C73 tempered glass. Lens silicone caulk sealed to doorframe and secured with continuous lens retention angles.
ListingsUL and CUL Listed for Wet Location.
Mounting BracketsOne die-formed 5052 aluminum alloy mounting brackets – .125". Mounting bracket allows 90° adjustment in either direction from horizontal. Positive position-ing accomplished by eight (4 per side) 1/4" .20 stainless steel hex head bolts secured in end cap plates.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com.
Reflector18-gauge CRS. White TGI polyester powder coat – 5 stage pre-treatment salt spray test 1,000 hours. Reflectance: 92%.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top