|Doorframe||18-gauge CRS. One-piece 60° beveled perimeter construction. Angle lens retention system. Doorframe secured to housing with stainless steel aircraft cables and (12) for 2×4 captive flush mounted Phillips head stainless steel fasteners.|
|Doorframe Gasket||One-piece closed cell extruded silicone gasket seals doorframe to housing.|
|Electrical||Electronic ballast <10% THD standard. Wireway hole in bottom of housing standard. See Ordering Information for alternate or multiple ballasts, sealed wireway, wireway location and optional equipment. Lamps by others.|
|Housing||20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.|
|Installation||Four .312" holes for surface mounting.|
|Lens||High impact frost acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens|
orientation – smooth side out.
|Listings||UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms.|