•  

CSESOL14

SimpleSeal

Main Product Imageaircraft-detail.pngfastener-detail.pngFULCRUM-COLORIZED-INSET.pngswingoutarms.pngwhip_6350.png
Model #: CSESOL14
Features:
  • Ceiling mount; surface – 1'×4'
  • One-piece doorframe provides air-tight integrity of luminaire
  • 2" deep cross section
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Lens Type(s):Frost High Impact Acrylic
.156" C73 Prismatic Tempered Glass
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s):Linear Fluorescent
Size(s):12"×48"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece 60° beveled perimeter construction. Angle lens retention system. Doorframe secured to housing with stainless steel aircraft cables and (10) for 1×4 captive flush mounted Phillips head stainless steel fasteners.
Doorframe GasketOne-piece closed cell extruded silicone gasket seals doorframe to housing.
ElectricalElectronic ballast <10% THD standard. Wireway hole in bottom of housing standard. See Ordering Information for alternate or multiple ballasts, sealed wireway, wireway location and optional equipment. Lamps by others.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationFour .312" holes for surface mounting.
LensHigh impact frost acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens
orientation – smooth side out.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top