•  

CSESO24-Red

SimpleSeal

Main Product Imageaircraft-detail.pngFULCRUM-COLORIZED-INSET.pngswingoutarms.pngwhip_6350.png
Model #: CSESO24-Red
Features:
  • Narrow-spectrum 630nm red LED circuit provides only high-purity light for spectrally-sensitive applications
  • High-output, high-CRI white LED circuit provides visual acuity and accurate color rendition
  • Diffused high-efficiency lens for reduced glare
  • One-piece inset doorframe, secured to housing with aircraft cables
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
Application(s):Pharmaceutical
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Lamp Type(s):LED
Size(s):24"×48"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and (8) for 2×2, (10) for 1×4, (12) for 2×4 captive flush mounted Phillips head stainless steel fasteners. Doorframe Gasket: One-piece closed cell extruded silicone gasket seals doorframe to housing.
ElectricalReplaceable white mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI, R9>0. 630nm red mid-power LED array (16nm FWHM bandwidth). 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 3-100% range on white and red circuit. 600 μA max. source current. EMC meets or exceeds FCC CFR Part 15 requirements. White circuit and red circuit can be independently powered and dimmed.
Housing20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationFour .312" holes for surface mounting with side wiring access hole.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP65 per IEC 60598. CCEA Approved. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Optional compliance to MIL-STD 461F - Air Force/Navy fixed. Suitable for BSL 1-4 laboratories.
OpticsSymmetric optic includes diffused, impact-resistant acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top