|Doorframe||1.2mm thick CRS. One-piece 60° beveled perimeter construction. Angle lens retention system. Doorframe secured to housing with stainless steel aircraft cables and (10) for 312 captive flush mounted Phillips head stainless steel fasteners. Thumb screws used for FN option. Doorframe Gasket: One-piece closed cell extruded silicone gasket seals doorframe to ceiling structure.|
|Electrical||Electronic ballast <10% THD standard. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others.|
|Housing||.9mm thick CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.|
|Installation||25mm, 38mm, 50mm T-Bar installation standard.|
|Lens||High impact frost acrylic lens sealed to perimeter ledge of lens aperture with urethane sealant and secured with continuous lens retention system. Lens|
orientation – smooth side out.
|Listings||UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Food Zone/Non-Contact. CCEA Approved. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms.|