•  

CSEGO612

SimpleSeal

Main Product Imageaircraft-detail.pngfastener-detail.pngFULCRUM-COLORIZED-INSET.pngswingoutarms.pngwhip_6350.png
Model #: CSEGO612
Features:
  • Recessed ceiling mount – grid for 25mm, 38mm and 50mm T-Bar; 600mm×1200mm
  • One-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure
  • Extruded aluminum, one-piece doorframe with 60° beveled edge for cleanability
  • One-piece, hole-free seam welded housing
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Lens Type(s):3.9mm C73 Prismatic Tempered Glass
Specified Lens
3.8mm #12 Prismatic High Impact Acrylic
UV Filtering (Specify)
3.8mm Clear
3.8mm #12 Prismatic
3.8mm Clear
Lamp Type(s):Linear Fluorescent
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe.9mm thick type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and (12) for 600×1200 captive flush mounted Phillips head stainless steel fasteners.
Doorframe GasketOne-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure.
ElectricalQuantity and type as specified – see Ordering Information. All ballasts UL listed class P. Wireway hole provided with hub/ring assembly. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others.
Housing.9mm thick CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Installation25mm, 38mm, 50mm T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-Bar ceilings.
Lens3.8mm #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with urethane sealant and secured with continuous lens retention system. Lens orientation – smooth sideout. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T).
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top