•  

CSEGO24

SimpleSeal

Main Product Imageaircraft-detail.pngfastener-detail.pngFULCRUM-COLORIZED-INSET.pngswingoutarms.pngwhip_6350.png
Model #: CSEGO24
Features:
  • Recessed ceiling mount – grid for 1.0, 1.5, and 2.0" T-bar; 2'×4'
  • One-piece overlapping door provides air-tight integrity of the luminaire
  • Optional Food Zone/Non-Contact listing ideal for food processing applications
  • For Hazardous applications please refer to the HSEGO series
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Lens Type(s):.125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
.156" C73 Prismatic Tempered Glass
Specified Lens
.125" Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
UV Filtering (Specify)
Lamp Type(s):Linear Fluorescent
Size(s):24"×48"
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and (12) for 2×4 captive flush mounted Phillips head stainless steel fasteners. Thumb screws used for FN option.
Doorframe GasketOne-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure.
ElectricalQuantity and type as specified – see Ordering Information. All ballasts UL listed class P. Wireway hole provided with hub/ring assembly. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others. LED: Replaceable high-brightness LED array in 3500K, 4000K and 5000K color temperatures. 80 CRI standard for 3500K, 70 CRI standard for 4000K and 5000K. See Options for higher CRI option on 4000K. 120-277VAC high power factor, constant current drivers. 10-100% dimming with compatible 0-10V current-sink dimmer.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5 step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Installation1.0", 1.5" and 2.0" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-Bar ceilings.
Lens.125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with urethane sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T). FN option includes FDA approved Food Zone lens over #12 high impact acrylic.
ListingsCertified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Optional NSF2 Food Zone/Non-Contact.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top