•  

CSEDO24-Amber

SimpleSeal

Main Product Image
Model #: CSEDO24-Amber
Features:
  • Narrow-spectrum 570nm amber LED circuit provides only high-purity light without UV for spectrally-sensitive applications
  • Available high-output, high-CRI white LED circuit provides visual acuity and accurate color rendition
  • Diffused high-efficiency lens for reduced glare
  • One-piece overlapping door provides air-tight integrity of luminaire
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
Application(s):Pharmaceutical
Biosafety and Containment
Schools and Universities
Cleanrooms
Containment Areas
Laboratories
Research and Development
Manufacturing
Lamp Type(s):LED
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4.
Doorframe GasketOne-piece closed cell extruded Nitrile gasket seals doorframe to housing and ceiling structure.
ElectricalReplaceable 570nm amber (115 nm FWHM bandwidth) mid-power LED arrays produce no Ultraviolet and less than 0.019 watts of light below 480nm. Available separately circuited white mid-power LED arrays in 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI. 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 3-100% range on white and amber circuits. White circuit and amber circuit can be independently powered and dimmed.
Housing 20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heatsink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationNon-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Housing is field-convertible between grid and flange-style mounting types. See Options for continuous row mounting and install frames.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP65 per IEC 60598. CCEA Approved. Optional NSF Protocol P442 certified. FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Suitable for BSL 1-4 laboratories.
OpticsSymmetric optic includes diffused, impact-resistant 0.118” thick acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top