Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

CSEDO14-Red

SimpleSeal

CSEDO14-Red Main Image
CSEDO14-Red Main ImageAircraft CableFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: CSEDO14-Red
Features:
  • Narrow-spectrum 630nm red LED circuit provides only high-purity light for spectrally-sensitive applications
  • High-output, high-CRI white LED circuit provides visual acuity and accurate color rendition
  • Diffused high-efficiency lens for reduced glare
  • One-piece overlapping door provides air-tight integrity of luminaire
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
Application(s):Pharmaceutical
Biosafety and Containment
Anterooms
Isolation Areas
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Lamp Type(s):LED
Size(s):12"×48"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4.
Doorframe GasketOne-piece closed cell extruded Nitrile gasket seals doorframe to housing and ceiling structure.
ElectricalReplaceable white mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI, R9>0. 630nm red mid-power LED array (16nm FWHM bandwidth). 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. EMC meets or exceeds FCC CFR Part 15 requirements. Standard 0-10V dimming with 1-100% range on white and red circuits with dim-to-dark capabilities (non dimto- dark with 347V; 495μA maximum source current per circuit). Optional 0-10V dimming with 0.1-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 600μA max. source current). White circuit and red circuit can be independently powered and dimmed.
HousingStandard 24-gauge (optional 20-gauge) cold rolled steel, hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationNon-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into grid or flange (drywall) ceiling applications. See Options for continuous row mounting and install frames.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP66 per IEC 60598. CCEA Approved. Optional NSF Protocol P442 certified. FED-STD- 209E/Class 1 (ISO 3) Cleanrooms. Suitable for BSL 1-4 laboratories.
OpticsSymmetric optic includes diffused, impact-resistant acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top