Skip to Content
Kenall Manufacturing - Homepage
Main Content

CDL6

SimpleSeal Downlights - Cleanroom & Containment

CDL6 Main Image
CDL6 Main Image
Model #: CDL6
Features:
  • 6" sealed, recessed downlight with flush lens trim
  • 730 - 4,800 delivered lumens with multiple distribution, reflector finish and lens options
  • 1% Dimming via 0-10V or DALI-2 control
  • NSF2 and IP64/IP65 ingress protection rating
Application(s):Biosafety and Containment
Cleanrooms
Containment Areas
Research and Development
Lens Type(s):.125" Clear Polycarbonate
.125" High-Impact Clear Acrylic
Lamp Type(s):LED
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED source available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA maximum source current. Optional eldoLED ECOdrive DALI-2 (DT6) / LEDcode2 driver with 1-100% range.
HeatsinkDie-cast aluminum with external radial fins for natural convection.
InstallationSuitable for ambient temperature temperatures of -30°C to +40°C, unless otherwise stated.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 and IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone. Optional CCEA compliance.
OpticalClear tempered glass upper lens.  1/8" clear impact-resistant acrylic or polycarbonate flush lens at ceiling trim.  Continuous seal between lens and trim ring.  Available with various reflector distribution patterns and finishes.  See Ordering Information for available options.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.  For photometric information, go to www.kenall.com.
Rough-In Frame18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.
Trim/Housing SectionIP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Configurable with an IP64-rated Flush lens trim that is secured to the Rough-In frame with hidden torsion springs, and an IP65 Flush lens trim secured with four (4) Phillips-head, captive fasteners. See Trim Ordering Information for available options.
WarrantyFive (5) year warranty against mechanical defects.  Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top